Grinding, The process of polishing glass or mirror edges with 90° or 45° inclinations is called straight running-in, and the process of polishing in arc form is called herringbone or C grinding.

If it is beveled, 90° of the glass or mirror edge; The process of finishing the glass front corner at the desired angle is called bevel. The bevel width changes with the angle. Polishing is the polishing of the matted cutting surface with a second process after running in.

Our factory in İnegöl has distribution all over the world.

Grooving 1.5-2 mm along a straight line of the glass surface. Forming by carving in depth is called a channel. In general, this process can be done on the surface close to the glass edges.
Drilling Glass The process of drilling glass or mirror with drill bits of various diameters with or without countersunk is called hole drilling. In Turkey...